April 7, 2025

41 thoughts on “Singapore Green Plan 2030

  1. Their green plan 2030 is a study in vision statements – and the thing about Singapore is they will actually achieve it! Unfortunately, some countries won’t even think big because they are afraid on not able to meet targets.

  2. Yes, Singapore is ahead of many countries in combating climate change. However, some points of improvement are:
    1. Fossil fuel divestment. Not subsidising isn't enough. To make a true impact, divestment is the way, starting from universities, to businesses in Singapore. Without divestment efforts, fossil fuel industries will only grow and continue to use their money in Anti-climate campaigns & efforts.
    2. Unknown to many, not even some of the ministers, Singapore is one of the countries that supports a future project of deep-sea mining. Action needs to be taken

  3. Taking actions is good. However, actions without measuring the effectiveness is risky and irresponsible. Has Singapore seen any improvement of the climate with the actions? The sunshine is getting stronger, which may not be too obvious in tropic.

  4. The Grow-Live Tower, which is a cylindrical structure with a central support column, periphery support columns, and suspension cables connecting the two to support the floor levels. This tower provides the food for the people that live in the lower 20 levels by growing it in the upper 60 levels. These Tower/generators, if embraced by the world, would end world hunger, homelessness, cut global disease by 85% due to improved living conditions, increase water conservation by 10,000%, end the poisoning of the world's water by petroleum and mono culture's 'one crop' farming, end the world money system by providing all the essentials for life for free.

    Restoring Arctic Ice. The water temperature at the bottom of the sea is colder than at the top, so simply pump up the cold water at the edge of the ice flow to slow the warming/melting process. This can be done by hanging 30' diameter tubes, by floatation vertically from the surface to close to the bottom. A pump at the top would need to just pump out 4' of water before the capillary effect would automatically begin bringing up the colder water to the surface. If 10,000 of these were placed close to the ice edge it would effectively lower the temperature of the water that is contacting the ice flow, slowing the melt during summer, increasing the ice build up in winter, and lowering the mean temperature of the region. Possible slowing the Greenland ice as well.

    The important thing to remember is that this global monetary system is an invention. As the numbers are invented to cause the world economy to crash. New numbers can also be invented to establish a prosperous one. A "World Zero" day can be instituted whereby all world debts are erased, all lenders are completely repaid by invented "new money", which is just as valid as the 'old money' now in their pockets. All rented homes are given to the dwellers and the new money payments are made to the landlords equal to ten years of payments, then nothing more. All auto payments end, the owners receive the titles, and the dealers are paid with new money. New money pays the people $8,000 every month in their accounts, and all of their health care needs with that industry receiving total payment for their services with new money, all student loan debts vanish. When the global monetarists attempt to 'crash' the new money system, the recorded history of the financial dealings is simply rewound back to before the crashing occurred, then restarted again. Crashes are only crashes on paper, not reality. This system can give freedom or slavery. It gives slavery because it is Satan's system and plays into prophecy.

    The Power Multiplier Device: Open sourced, gravity driven, continuous motion, free energy generator: Power Multiplier Device, last resize (I hope)-overunity.com

    Functions as follows:

    Small motor draws energy from the battery to turn a large bicycle-type wheel clockwise, turning the drive sprocket clockwise also because both share the same axle. This has the drive sprocket climb the chain, taking the whole assembly with its 2,000 pounds of weights. Three things now happen:

    1) The motor takes the assembly to the top of the chain with its 400 pound pull, taking 1 hour to do so, requiring the energy amount from the battery. Energy Expended going up. EE/up= 1 hour pull of 400 pounds from the battery.

    2) As the assembly is climbing the chain, it's heavy weight (2,000 lbs.) is still hanging/pulling on the chain, pulling the chain down which turns the transmission/generator, producing a full charge of energy going back into the battery. Energy generated going up, EG/Up = 1 hour of a 2,000 pound pull by the heavy mechanism.

    3) When the assembly reaches the top the small motor shuts off and the assembly's weight slowly begins to descend, pulling the chain down with it. Since it climbed the chain faster than it pulled the chain down, its descent will take longer than 1 hour for its energy generated down charge into the battery. EG/Down = 1+ hour of a 2,000 pound pull charging into the battery.

    EE/Up 1 hour of a 400 pound pull < EG/UP (1 hour of a 2,000 pound pull charge into the battery) + EG/Down (1+ hours of the 2,000 pound pull charge into the battery) = FE, EE/UP < (EG/UP + EG/Down) = FE.

    With a heavier weight:

    1) The motor takes the assembly to the top of the chain, taking 3 minutes to do so, requiring the energy amount from the battery that is represented by the expression 1N. Energy expended going up. EE/up=1N.

    2) As the assembly is climbing the chain, it's heavy weight is still hanging/pulling on the chain, pulling the chain down which turns the transmission/generator, producing a full charge of energy going back into the battery. Energy generated going up, EG/up=.4N.

    3) When the assembly reaches the top, the small motor shuts off and the assembly's weight slowly begins to descend, pulling the chain down with it. This descent takes 10 times longer than the ascent due to the heavy weight of the assembly, and the low gearing of the transmission, it 'creeps' down.

    In 3 minutes going up, .4N was charged back into the battery. In 6 minutes going down .8N will be charged into the battery, replacing all of the energy the small motor expended. The remaining 24 minutes of the descent will charge 3.2N into the battery, Energy generated going down, EG/down=3.2N energy not needed for the mechanism's operation, free energy.

    EE/up < (EG/up + EG/down) = FE, or, 1N < (.4N + 4N) = 3.4N FE

    Connecting another PMD having more weight to the lower sprocket of the first will produce more energy. The chain goes around the lower sprocket of the first one, and up around the bicycle type of the second, so the lower sprocket of the first one is acting like the small motor does to turn the first one’s bicycle type wheel. A swing arm is place between the two wheels to play out more chain as the second PMD’s bicycle type wheel ascends. Then a third PMD connected to the second….

    This will decentralize the grid using home generation modules, end fossil fuel energy plants, end nuclear, solar, wind, ocean energy generation plants. It will also allow for cars that recharge themselves as they travel down the road with modified PMDs.

  5. Singapore is blessed with good leaders who care about its citizens' well-being. Myanmar is unlucky, and plagued with a series of dictatorships. The current one is the worst, and hopefully the last.

  6. We should strictly ensure the rubbish like
    1. Foodstuffs.
    2. Cans.
    3. Plastics.
    4. Cardboards
    are discarded in a standard way that are easy to separate and sorted before reuse or for incineration.
    Till today March, 2024 we still are not doing it properly.

  7. well, at least you guys are putting an effort to the cause. Not like some countries that only says and "police" the world imposing sanctions and "confiscating" their assets and they actually do nothing…
    The famous "do what I say but do not do what I do"

Leave a Reply

Your email address will not be published. Required fields are marked *